View B39212B4400P810_9031400.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

saw components saw duplexer automotive telematics series/type: ordering code: b4400 B39212B4400P810 date: version: november 07, 2014 2.3 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
2 november 07, 2014 b4400 1950.0 / 2140.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet application n low-loss saw duplexer forw-cdma band 1 (umts) systems n low insertion attenuation n low amplitude ripple n usable passband 60 mhz n single-ended to balanced transformation inantenna-rx path n impedance transformation 50 w to 100 w in antenna-rx path n high isolation between tx and rx features n package size 2.0 * 1.6 mm 2 n package height max. 0.45mm n rohs compatible n approximate weight 0.005 g n package for s urface m ount t echnology ( smt ) n ni terminals, au-plated n aec-q200 qualified component family (operable temperature range -40?c to +85?c) n e lectrostatic s ensitive d evice ( esd ) bottom view side view top view 1 2 3 5 6 7 8 4 9 0.43 0.33 0.35 0.29 0.7 0.45 max. 7 5 2 6 1 3 8 4 2.0 1.6 0.29 pin configuration n 3 tx input n 1, 8 rx output (balanced) n 6 antenna n 2, 4, 5, 7, 9 to be grounded 4,5,9 1 3 8 2,7 6
3 november 07, 2014 b4400 1950.0 / 2140.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristicstemperature range for specification: t = C20 ?c to +85 ?c tx terminating impedance: z tx = 50 w || 6.0 nh ant terminating impedance: z ant = 50 w || 2.2 nh rx teminating impedance: z rx = 100 w (balanced) || 17 nh characteristics tx-antenna min. typ. @ 25 ?c max. center frequency f c 1950.0 mhz maximum insertion attenuation a w-cdma 1) 1) attenuation of w-cdma signal (power transfer function). please, refer to page 7 of this document. 1922.4 ... 1977.6 mhz 1.7 2.3 db amplitude ripple (p-p) a w-cdma 1) 1922.4 ... 1977.6 mhz 0.5 1.1 db error vector magnitude evm 2) 2) error vector magnitude (evm) based on definition given in 3gpp ts 25.141 1922.4 ... 1977.6 mhz 1.4 2.3 % tx port vswr 1920.0 ... 1980.0 mhz 1.6 2.0 ant port vswr 1920.0 ... 1980.0 mhz 1.4 2.0 attenuation a 10.0 ... 410.0 mhz 45 69 db 420.0 ... 494.0 mhz 43 64 db 843.0 ... 894.0 mhz 40 47 db 1565.0 ... 1574.0 mhz 41 45 db 1574.0 ... 1577.0 mhz 42 46 db 1577.0 ... 1586.0 mhz 42 47 db 1597.0 ... 1605.0 mhz 43 48 db 1605.0 ... 1805.0 mhz 34 39 db 1805.0 ... 1865.0 mhz 30 36 db 1865.0 ... 1880.0 mhz 12 33 db 2112.4 ... 2167.6 mhz a w-cdma 1) 46 54 db 2400.0 ... 2500.0 mhz 31 38 db 2620.0 ... 2690.0 mhz 30 36 db 3830.0 ... 3970.0 mhz 28 34 db 5150.0 ... 5950.0 mhz 18 22 db
4 november 07, 2014 b4400 1950.0 / 2140.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristicstemperature range for specification: t = C20 ?c to +85 ?c tx terminating impedance: z tx = 50 w || 6.0 nh ant terminating impedance: z ant = 50 w || 2.2 nh rx teminating impedance: z rx = 100 w (balanced) || 17 nh characteristics antenna-rx min. typ. @ 25 ?c max. center frequency f c 2140.0 mhz maximum insertion attenuation a w-cdma 1) 1) attenuation of w-cdma signal (power transfer function). please, refer to page 7 of this document. 2112.4 ... 2167.6 mhz 2.2 2.4 db amplitude ripple (p-p) a w-cdma 1) 2112.4 ... 2167.6 mhz 0.4 0.8 db error vector magnitude evm 2) 2) error vector magnitude (evm) based on definition given in 3gpp ts 25.141 2112.4 ... 2167.6 mhz 1.0 2.0 % ant port vswr 2110.0 ... 2170.0 mhz 1.8 2.2 rx port vswr 2110.0 ... 2170.0 mhz 1.6 2.0
5 november 07, 2014 b4400 1950.0 / 2140.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristicstemperature range for specification: t = C20 ?c to +85 ?c tx terminating impedance: z tx = 50 w || 6.0 nh ant terminating impedance: z ant = 50 w || 2.2 nh rx teminating impedance: z rx = 100 w (balanced) || 17 nh characteristics antenna-rx min. typ. @ 25 ?c max. attenuation a 10.0 ... 1920.0 mhz 45 53 db 1922.4 ... 1977.6 mhz a w-cdma 1) 1) attenuation of w-cdma signal (power transfer function). please, refer to page 7 of this document. 50 55 db 1980.0 ... 2025.0 mhz 33 49 db 2255.0 ... 2400.0 mhz 25 45 db 2400.0 ... 2484.0 mhz 41 44 db 2484.0 ... 5600.0 mhz 40 45 db 5600.0 ... 6000.0 mhz 28 32 db
6 november 07, 2014 b4400 1950.0 / 2140.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristicstemperature range for specification: t = C20 ?c to +85 ?c tx terminating impedance: z tx = 50 w || 6.0 nh ant terminating impedance: z ant = 50 w || 2.2 nh rx teminating impedance: z rx = 100 w (balanced) || 17 nh characteristics tx-rx min. typ. @ 25 ?c max. differential mode isolation a 1574.0 ... 1577.0 mhz 40 79 db 1922.4 ... 1977.6 mhz a w-cdma 1) 1) attenuation of w-cdma signal (power transfer function). please, refer to page 7 of this document. 52 57 db 2112.4 ... 2167.6 mhz a w-cdma 1) 53 59 db 3830.0 ... 3970.0 mhz 30 61 db 5750.0 ... 5950.0 mhz 30 44 db common mode isolation a 1922.4 ... 1977.6 mhz a w-cdma 1) 42 45 db
7 november 07, 2014 b4400 1950.0 / 2140.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. annotation for characteristics sectionattenuation of w-cdma signal (power transfer function, a w-cdma ) is determined by with f carrier according to 3gpp ts 25.101 (e.g. for umts pass band, f carrier ranges from 1922.4 mhz (lowest tx channel) to 2167.6 mhz (highest tx channel)). here, h rrc (f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3gpp ts 25.101 with the following normalization: s sd 21 f ( ) h rrc f f carrier C ( ) 2 fd C h rrc f ( ) 2 f 1 = d C
8 november 07, 2014 b4400 1950.0 / 2140.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet maximum ratings operable temperature range t C40/+85 ?c storage temperature range t stg C40/+85 ?c dc voltage v dc 0 v esd voltage v esd 50 1) 1) according to jesd22-a115a (machine model), 10 negative and 10 positive pulses. v machine model, 10 pulses input power at 1920.0 ... 1980.0 mhz p in 29 dbm continuous wave elsewhere p in 10 dbm 50 ?c, 5000h }
9 november 07, 2014 b4400 1950.0 / 2140.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-antfrequency response tx-ant (wideband)
10 november 07, 2014 b4400 1950.0 / 2140.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response rx-antfrequency response rx-ant (wideband)
11 november 07, 2014 b4400 1950.0 / 2140.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-rxfrequency response tx-rx (wideband)
12 november 07, 2014 b4400 1950.0 / 2140.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet return loss s 11 tx- port s 33 rx-port s 22 ant-port
13 november 07, 2014 b4400 1950.0 / 2140.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. references type b4400 ordering code B39212B4400P810 marking and package c61157-a8-a50 packaging f61074-v8247-z000 date codes l_1126 s-parameters b4400_nb_un.s4p, b4400_wb_un.s4psee file header for port/pin assignment table. soldering profile s_6001 rohs compatible rohs-compatible means that products are compatible with the requirements according to art. 4 (substance restrictions) of di- rective 2011/65/eu of the european parliament and of the council of june 8 th , 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("directive") with due regard to the application of exemptions as per annex iii of the directive in certain cases. moldability before using in overmolding environment, please contact your epcos sales office. matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for further information please contact your local epcos sales office or visit our webpage at www.epcos.com . published by epcos agsystems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2014. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or the international representatives. due to technical requirements components may contain dangerous substances. for information on the type in question please also contact one of our sales offices.
14 november 07, 2014 b4400 1950.0 / 2140.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, tfap, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39212B4400P810

	To Download B39212B4400P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .